Abrasive Wheels and Diamond Wheels Certification [PUWER]
Training and assessment for operators of abrasive wheel machines at work to comply with the legal requirement for training of operatives and to reduce the risk of serious injury with their use.
Duration - Experienced operative Half-day Novices One-Day
Type / Category - Type 41 42 27 and *option for diamond abrasive wheels
Certification - CDP certificate or photo ID card plus CITB C-Skills grant approval no.
Maximum 10 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Legal Requirements HSAWA /PUWER
- Duties Of Employers and employees
- Selection of correct wheel and machines types
- Mounting wheels correctly (Type 41/42/27/ DAW)
- Safe Use Of Work Equipment (practical for persons without experience)
- Personal Protective Equipment (PPE) standards
- Safe selection and use of diamond wheels included*
- Written assessment paper
Asbestos Awareness Training
Asbestos is responsible for a increasing number of deaths and ill health training for operatives is essential [HSE] This training is for the prevention of asbestos disturbance; and to take the necessary precautions before work and stop f there is doubt about any material found within the work area.
Duration - All candidates operatives One-Day
Type / Category - Asbestos awareness
Certification - CDP certificate or IATP accredited certificate
Maximum 12 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- What the Law requires .
- The duty to manage
- What we have to do?
- Identifying hazards- How to recognise them
- Where might you find it?
- Asbestos Containing Materials [ACM]
- Internal surfaces
- Miscellaneous uses
- Practical steps to manage hazards
- Written Assessment – Multi-choice paper
CAT and Genny Cable Avoidance Tool Operation
This session explains the current guidelines on how to reduce the risk of accidents when working near underground services and excavations as stated in HSE guidance HSG 47. Candidates are shown the use and limitations of cable avoidance tools [CAT] followed by written and practical assessments.
Duration - All candidates operatives One-Day
Type / Category - Cable avoidance tool CAT
Certification - CDP certificate or photo ID card plus CITB C-Skills grant approval No
.
Maximum 8 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Underground Services - Identification drawings
- Detecting and tracing underground services
- Reasons for using avoidance tools / locators
- Safe digging practices theory
- Limitations of CAT and Signal Generators
- Inspection required for detection equipment
- Methods of locating /avoiding services
- Practical - assessed in basic avoidance techniques
Chainsaw Operation Construction Use Cross Cut and Maintenance
Chainsaws can be cause serious injuries if not operated and maintained correctly this session explains how to prepare for work with chainsaws use, select the correct PPE carry out rutine adjustments and operate the machine safely, the session is not designed for operatives who need to carry out work in trees or at height.See HSE INDG 317 for guidance
Duration - Experienced operatives One-Day Novice operatives Two-days
Type / Category - Chainsaw ground clearance / construction cross cut & maintenance
Certification - CDP certificate or photo ID card plus CITB C-Skills grant approval No.
Maximum 4 candidates per session
Maximum 8 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Health and safety law [PUWER] 1998
- Specialist PPE required by law
- Pre-start safety checks
- Work material and area checks
- Safe operation and adjustment [practical]
- Written assessment / Test Material
COSHH Awareness
Reduce the risk of exposure to hazardous substances comply with the legal requirements of current regulations and manage substances at work all are included on our half-day course. There is also an option to gain a CIEH accredited qualification at level 2 [Ofqual and QCF approved]
Duration - All candidates Half -Day
Type / Category - COSHH Awareness Certificate
Certification - CDP Certificate or CIEH Level 2 Award or CITB C-Skills grant approval No.
Maximum 12 candidates per session
Maximum 8 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- The current COSHH Regulations
- Identifing Hazardous substances
- Health problems from exposure
- Controlling hazardous substances at work
- Explain COSHH assessments and data sheets
- Written assessment multi choice.
First Aid - Emergency First Aid At Work EFAW
The Health and Safety (First-Aid) Regulations 1981 require employers to provide suitable first-aid equipment, facilities and personnel to enable immediate assistance to be given to employees if they are injured or become ill at work this course leads to an Ofqual QCF Level 2 Qualification in first aid.
Duration - All candidates One-Day
Type / Category - Emergency First Aid At Work Qualification Level 2 Award
Certification - CIEH Ofqual QCF and HSE approved certificate and card
Maximum 12 candidates per session
Maximum 8 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Roles and responsibilities of a first aider
- Assessment and management of first-aid incidents
- Management of an unconscious casualty
- Management of a casualty not breathing normally
- Management of a choking casualty
- Management of a casualty who is bleeding
- Management of a casualty in shock
- Treatment of minor injuries
Diamond Blade and Tools Use
Learn how to save up to 200% on your diamond tool use through correct selection and operating techniques, you will learn how to check diamond tools [blades and core drills] for safe use and how to comply with legal requirements. Candidates will be shown how to avoid common problems causing operator hazards and excessive wear.
Duration - All candidates Half -Day
Type / Category - Diamond Blade and Tools Awareness
Certification - CDP Certificate
Maximum 12 candidates per session
Maximum 8 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Types of equipment available
- Correct selection, bond types, and configurations
- Safe / Profitable use of diamond tools
- Regional variations / aggregate types
- Current legislative requirements
- Risk assessment
- Problem solving troubleshooting
- Guide to types. Materials and application for each candidate
The courses here are mostly operation sessions usually carried out on customer premises or site - our training consists of some theory work but the aim is to offer practical examples of operation so there will be plenty candidate involvement to apply the course content to real world situations encountered day to day.
Working at Height or Harness Safety
The working at height regulations 2005 require that all persons needing to work at height including from mobile elevated work platforms are provided with suitable equipment and training, safety harness use is a ‘last resort’ measure when falls can not be prevented or limited so the correct selection inspection and fitting.
Duration - All candidates One-Day
Type / Category - Working at Height Awareness and harness safety option.
Certification - CDP Certificate CITB C-Skills grant approval No.
Maximum 10 candidates per session
Each Candidate Receives:
A Full colour evidence book
Certificate or photo I D card
Entry on to our database
- Health & Safety Legislation working at height
- Fall protection equipment and working at heights
- Safety inspection of harness & lanyard prior to use
- Correct fitting / adjusting of a harness - [practical]
- Identifying correct anchor points
- Hazards & precautions
- Hazard analysis & risk assessment
- Rescue plan requirement
Refer to the ‘All Training Index’ for other courses and training here
Tower Access and Scaffold Training
The work at height regulations 2005 require competent persons to erect and use access equipment, we offer the following courses specific to the type of access system used.
Type / Category - Emergency First Aid At Work Qualification Level 2 Award
Certification - CIEH Ofqual QCF and HSE approved certificate and card
Maximum 12 candidates per session
Maximum 8 candidates per session
Each Candidate Receives:
A full colour evidence book
Certificate or photo I D card
Entry on to our database
- PASMA accredited Access tower training -1 day
- In company Work at heights and tower training -1 day
- Ladder and steps safety awareness- Half-day
- Fixed scaffold appreciation and pre use checks -1 day
- Fixed scaffold inspection course class and practical [Site] - 2 days
- IPAF accredited powered access - scissor and boom click here
CDP Chris with customer - on site training
CDP Training offer an on site face fit test service on with record log for each candidate call for details
Dust mask face fit
Testing - Available
on site
Dust mask face fit
Testing - Available
on site
Dust mask face fit
Testing - Available
on site
